1. Keep out of reach of children.
2. Wash face, hands and any exposed skin thoroughly after handling.
3. Wear protective gloves/ protective clothing/ eye protection/ face protection.
4. Additional information may be obtained from Safety Data Sheet (SDS).
Surface Preparation:
Surfaces must be cleaned, free from oil, dirt and other
contaminants. Ensure the surface is dry before application.
Directions for Use:
1. For surfaces that are badly rusted, remove all loose rust with a wire-brush. Ensure that the rust has been scrapped off to a thin layer before application.
2. Shake Bottle well before use.
3. Using a brush or roller, apply a generous layer of Mr McKenic®- Magic Rust Converter onto the rusty surface.
4. Allow first coat to dry before applying a second coat.
5. For maximum protection, apply 2 layers of coats.
6. If re-painting is required, apply 1 coat and paint over.
7. For much enhanced protection, apply Mr McKenic® -Zinc Galvanising Compound.
Drying Time:
Each layer of coating will take 10 to 20 minutes at 30°C to be dry to touch. It is recommended to leave it for at least 8 hours for the coating to be fully cured.
Coverage:
1 Litre can cover approximately 10 square meters for a single layer of coat.
Storage:
Keep in a cool dry place away from direct sunlight.
Do not expose to temperature exceeding 50°C.
Once opened, try to finish the product.
For unfinished product, tighten the cap immediately.
