Click to enlarge
Previous product
FG CONDENSATE PAN TABLETS (20PCS/PACK) ₹8,975.00
Back to products
Mr Mckenic

CLEAR POLYARCYLIC COATING (400ML)

₹1,040.00

Mr McKenic® – Clear Polyacrylate Coating is a protective spray that acts as a barrier to protect surfaces
against moisture, air, harmful sun rays, industrial fumes and other environmental pollutants which act as catalysts for rust & corrosion.

Brand

Mr Mckenic
Industries

AFTER MARKET REPAIR SERVICES, AUTOMOTIVE, AVIATION, DEFENCE, GENERAL INDUSTRY, HEAVY INDUSTRY, OIL & GAS, POWER, RAILWAYS, SHIP BUILDING
Add to wishlist
SKU: EE1336-A-1-1 Category:

Benefits:

  • Prevents Growth of Algae/Slime
  • Contains Corrosion Inhibitors
  • Reduces Corrosion and Scale Build-Up
  • Non-Toxic
  • Fast Cleaning Action
  • 2-3 Month Effectiveness
  • Eliminates Bacteria-causing Diseases
  • Prevents Clogging and Over-flowing
Handling Precautions

1. For professional use only.
2. Avoid breathing dust/fume/gas/mist/vapours/spray.
3. Wash face, hands and any exposed skin thoroughly after handling.
4. Use only outdoors or in a well-ventilated area.
5. Avoid release to the environment.
6. Wear protective gloves/ protective clothing/ eye protection/face protection.
7. Keep away from heat/sparks/open flames/hot surfaces. -No smoking.
8. Do not spray on an open flame or other ignition source.
9. Additional information may be obtained from Safety Data Sheet (SDS)

For Aerosol Packing
1. Pressurized Container. Do not pierce or burn after use.
2. Do not expose to temperatures beyond 50°C
3. Flammable propellant within.

PROPERTIES

  • Physical State : Liquid
  • Colour : Clear
  • pH Value : Not Applicable
  • Solubility (In Water) : Insoluble
  • Density : 0.90 ± 0.03kg/m3

PACKING

  • PC8011-AF : 400ml Aerosol Can

DIRECTIONS

Surface Preparation:
Remove all existing oils, dirt, rust and other contaminants from the surfaces. Ensure surface is dry before application.

For Aerosol Packing:
1. Shake can well before use.
2. Spray Mr McKenic®- Clear Polyacrylate Coating by holding the can 20-25cm from target surfaces.
3. Allow film to be semi-dry before applying a second layer of coating.
4. Leave it for at least 8 hours to allow coating to be fully cured.

Note: Always test on a small area when used for the first time on a new surface.

Drying Time : 45 to 60 minutes at 30°C.
Coverage : 1 Aerosol Can can cover approximately 2 square meters for a single layer coat.
For Bulk Packing, refer to Mr McKenic®- PC8012 Pro-GuardTM
Removal : Mr McKenic® - Clear Polyacrylate Coating can be removed from equipment or tools by using solvent cleaners such as Mr McKenic°- Mould & Metal Cleaner.

APPLICATIONS

Mr McKenic® -

◆ Clear Polyacrylate Coating is widely used on metal, wood, glass, bricks, floorings, electronic PCB, electrical components and other surfaces to prevent deterioration due to moisture and other contaminants. ◆ Suitable for both indoor and outdoor applications.

Related products

Close

CONTACT CLEANER (422G)

₹918.00
Mr McKenic®- Contact Cleaner is a non-CFC, non-HCFC cleaning solvent for general industrial and maintenance use. It effectively dissolves and removes dust, dirt, grime, grease, tar, adhesives and flux from electrical and electronic contact points. It is quick drying and evaporates without leaving any residue. This product is suitable for use on electronic parts, metal and most plastics.
Add to wishlist
Add to cart
Quick view
Close

SAFETY ELEC CLEANER AND DEGREASER (447G)

₹856.00
Mr McKenic®- Safety Electrical Cleaner & Degreaser is a non-flammable, non-toxic safety solvent cleaner that effectively cleans and removes oil, grease and stain residues from electrical/electronic equipments, generators, motor-power tools and most metal surfaces. Besides being non-flammable, it has a high dielectric strength of 50.7kV, making it safe for use in power stations, oil & gas refineries, marine offshore and any industry where fire safety is of high importance.
Add to wishlist
Add to cart
Quick view
Close

CONTACT CLEANER LUBRICANT (450G)

₹776.00
Mr McKenic®- Contact Cleaner & Lubricant is a precision cleaning solvent cum lubricant. It effectively removes unwanted contaminants and stubborn stains such as dirt, grime, grease, oxidation, light rust and carbon deposit from electrical and electronic contact points. At the same time, Mr McKenic®- Contact Cleaner & Lubricant lubricates and protects against material abrasion while leaving a thin film to prevent further oxidation, corrosion and carbon build-up.
Add to wishlist
Add to cart
Quick view
Close

 STAINLESS STEEL CLEANER AND POLISHER (400ML)

₹856.00
Mr McKenic®- Stainless Steel Cleaner & Polisher is a specially formulated high performance product that cleans, polishes and protects stainless steel surfaces in one step. It removes gunk and grime like fingerprints and grease from surfaces while leaving a thin protective film to prevent smudges, dust build-up to give an instant streak-free shine.
Add to wishlist
Add to cart
Quick view
Close

ADHESIVE REMOVER (322G)

₹826.00
Mr McKenic®- Adhesive Remover for Sensitive Surfaces is formulated to remove marks made by adhesive tapes, inks, crayons, markers, acrylic paints etc from sensitive surfaces such as computer surfaces, plastics, coated or painted surfaces and metals.
Add to wishlist
Add to cart
Quick view
Close

MOULD AND METAL CLEANER (447G)

₹776.00
Mr McKenic®- Mould & Metal Cleaner is a non-flammable, low toxic safety solvent cleaner that effectively cleans and removes oil, stain residues from mould and metal surfaces.
Add to wishlist
Add to cart
Quick view
Close

PUMP CLEANER 290G

₹918.00
Mr McKenic®- Pump Clean is a premium cleaning solvent used to clean electronic equipment, generators and motor-powered tools. It contains no harsh chemicals and can be used on most materials, including rubber, plastic and painted surfaces.
Add to wishlist
Add to cart
Quick view
Close

SILICON SPRAY 400ML

₹796.00
Mr McKenic® - Silicone Spray is a premium multi-protective spray for both metal and non-metal surfaces, including rubber and plastic. Its quick-dry formula effectively lubricates waterproofs and protects moving components without leaving sticky residue. It gently cleans and maintains materials like vinyl and rubber by leaving a protective film to prevent dust build-up and giving an instant shine at the same time. Mr McKenic® - Silicone Spray comes in two variants that cater for different applications, as shown in table below. The Premium variant provides better lubrication and longer protection while the Fast Dry variant offers quick lubrication and light protection for applications where aesthetics is required. CODE PRODUCT LU1809 | Silicone Spray (Premium) LU1809(3) | Silicone Spray (Fast Dry)
Add to wishlist
Add to cart
Quick view