Click to enlarge
Previous product
MOULD AND METAL CLEANER (447G) ₹776.00
Back to products
Next product
SILICON SPRAY 400ML ₹796.00
Mr Mckenic

 STAINLESS STEEL CLEANER AND POLISHER (400ML)

₹856.00

Mr McKenic®- Stainless Steel Cleaner & Polisher is a specially formulated high performance product that cleans, polishes and protects stainless steel surfaces in one step.
It removes gunk and grime like fingerprints and grease from surfaces while leaving a thin protective film to prevent smudges, dust build-up to give an instant streak-free shine.

Brand

Mr Mckenic
Industries

AFTER MARKET REPAIR SERVICES, AUTOMOTIVE, AVIATION, COMMERCIAL, CONSTRUCTION, CONSUMER DURABLES, DEFENCE, GENERAL INDUSTRY, HEALTH CARE, HEAVY INDUSTRY, HOSPITALITY, OIL & GAS, POWER, RAILWAYS, RESIDENTIAL, SHIP BUILDING
Add to wishlist
SKU: CC8207-A Category:

Benefits:

  • Removes Gunk and Grime
  • Polishes without Scratching
  • Protects Against Smudging
  • Restores Shine for Dull Surfaces
  • Time and Labour Cost Saving
  • Easy Application
  • Safe On Most Metal Surfaces
Handling Precautions

1. Do not spray on an open flame or other ignition source.
2. Keep container tightly closed.
3. Ground/Bond container and receiving equipment.
4. Use explosion-proof electrical/ ventilating/ lighting/
equipment.
5. Use only non-sparking tools.

6. Take precautionary measures against static discharge.
7. Wash thoroughly after handling.
8. Use only outdoors or in a well-ventilated area.
9. Wear protective gloves/ eye protection/ face protection.
10. Additional information may be obtained from Safety Data
Sheet (SDS).

 

For Aerosol Packing
1. Pressurized container. Do not pierce or burn after use.
2. Do not expose to temperature beyond 50°C.
3. Flammable liquid within.

PROPERTIES

  • Physical State : Liquid
  • Colour Clear : Light Yellow
  • pH Value : Not Applicable
  • Solubility (in Water) : Insoluble
  • Density : 0.79 ± 0.03 kg/m3

PACKING

  • CC8207-A : 400ml Aerosol Can
  • CC8207-M5 : 5Ltr Tin
  • CC8207-M25 : 25Ltr Drum

APPLICATIONS

Mr McKenic®- Stainless Steel Cleaner & Polisher is widely used to polish stainless steel surfaces found in hotels, food processing machinery, lifts, elevators and any industries where maintenance of aesthetic appearance and prevention of stainless steel surface deterioration are required.

Related products

Close

PUMP CLEANER 290G

₹918.00
Mr McKenic®- Pump Clean is a premium cleaning solvent used to clean electronic equipment, generators and motor-powered tools. It contains no harsh chemicals and can be used on most materials, including rubber, plastic and painted surfaces.
Add to wishlist
Add to cart
Quick view
Close

CONTACT CLEANER LUBRICANT (450G)

₹776.00
Mr McKenic®- Contact Cleaner & Lubricant is a precision cleaning solvent cum lubricant. It effectively removes unwanted contaminants and stubborn stains such as dirt, grime, grease, oxidation, light rust and carbon deposit from electrical and electronic contact points. At the same time, Mr McKenic®- Contact Cleaner & Lubricant lubricates and protects against material abrasion while leaving a thin film to prevent further oxidation, corrosion and carbon build-up.
Add to wishlist
Add to cart
Quick view
Close

MOULD AND METAL CLEANER (447G)

₹776.00
Mr McKenic®- Mould & Metal Cleaner is a non-flammable, low toxic safety solvent cleaner that effectively cleans and removes oil, stain residues from mould and metal surfaces.
Add to wishlist
Add to cart
Quick view
Close

CLEAR POLYARCYLIC COATING (400ML)

₹1,040.00
Mr McKenic® - Clear Polyacrylate Coating is a protective spray that acts as a barrier to protect surfaces against moisture, air, harmful sun rays, industrial fumes and other environmental pollutants which act as catalysts for rust & corrosion.
Add to wishlist
Add to cart
Quick view
Close

SILICON SPRAY 400ML

₹796.00
Mr McKenic® - Silicone Spray is a premium multi-protective spray for both metal and non-metal surfaces, including rubber and plastic. Its quick-dry formula effectively lubricates waterproofs and protects moving components without leaving sticky residue. It gently cleans and maintains materials like vinyl and rubber by leaving a protective film to prevent dust build-up and giving an instant shine at the same time. Mr McKenic® - Silicone Spray comes in two variants that cater for different applications, as shown in table below. The Premium variant provides better lubrication and longer protection while the Fast Dry variant offers quick lubrication and light protection for applications where aesthetics is required. CODE PRODUCT LU1809 | Silicone Spray (Premium) LU1809(3) | Silicone Spray (Fast Dry)
Add to wishlist
Add to cart
Quick view
Close

CONTACT CLEANER (422G)

₹918.00
Mr McKenic®- Contact Cleaner is a non-CFC, non-HCFC cleaning solvent for general industrial and maintenance use. It effectively dissolves and removes dust, dirt, grime, grease, tar, adhesives and flux from electrical and electronic contact points. It is quick drying and evaporates without leaving any residue. This product is suitable for use on electronic parts, metal and most plastics.
Add to wishlist
Add to cart
Quick view
Close

SAFETY ELEC CLEANER AND DEGREASER (447G)

₹856.00
Mr McKenic®- Safety Electrical Cleaner & Degreaser is a non-flammable, non-toxic safety solvent cleaner that effectively cleans and removes oil, grease and stain residues from electrical/electronic equipments, generators, motor-power tools and most metal surfaces. Besides being non-flammable, it has a high dielectric strength of 50.7kV, making it safe for use in power stations, oil & gas refineries, marine offshore and any industry where fire safety is of high importance.
Add to wishlist
Add to cart
Quick view
Close

ADHESIVE REMOVER (322G)

₹826.00
Mr McKenic®- Adhesive Remover for Sensitive Surfaces is formulated to remove marks made by adhesive tapes, inks, crayons, markers, acrylic paints etc from sensitive surfaces such as computer surfaces, plastics, coated or painted surfaces and metals.
Add to wishlist
Add to cart
Quick view